SCNL, Saipem Contracting Nigerian Limited Recruitment Application Form 2020/2021- SCNL, Saipem Contracting Nigerian Limited is currently recruiting applicants in the following 2020 recruitment vacancies; Project Manager, Fabrication Project Manager, Project Quality Manager, Welding Supervisor, Cost Control Engineer, Welding Engineer, Assets Maintenance Engineer, Production Planner, Fab Yard Mechanical Completion Co-ordinator, Maintenance and Inspection Manager – (2000001W), Pre-Fabrication Superintendent – (2000001J)
Positions available for recruitment in Saipem Contracting Nigerian Limited Recruitment 2020
We are currently recruiting to fill the eleven (11) vacant positions listed below:
Job Title 1: Project Manager
Main Responsibility
- Lead in Project planning and execution.
- Company’s focal point for project interface management with Clients, Licensors, Partners and Subcontractors.
- Analyse and review contractual documents.
- Implementation of methodologies for risk/opportunity and knowledge management.
- Implementation of the project strategies and project activities planning (Project Execution Plan, Quality Plan, Procurement Plan, HSE Plan, Fabrication Plan, Installation Plan, etc.)
- Approve and supervise planning and cost control activities, implement ing necessary corrective actions needed to achieve established project objectives.
- Supervise engineering and procurement activities in-country and out-country.
- Lead negotiation on variation orders and other commercial and contractual issues
- Ensure collection of project feedbacks and issuance of project’s final reports.
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Science/Engineering or related discipline is required. A Master’s degree is an added advantage but not a pre-requisite.
- At least 15 years of relevant experience in Offshore Fabrication activities of which 5 years must have been at management level.
- Excellent knowledge of construction and commissioning principles
- Excellent project QHSE leadership skills
- Knowledge of local statutory requirements for oil and gas project.
- Excellent interpersonal relationship with customer focus.
- Pre & post-tender contract management skills
- Good knowledge of Engineering and Procurement systems/ methodologies
How to Apply: Click here to apply online
Job Title 2: Fabrication Project Manager
Main Responsibility
- Plan and control production tools, equipment and personnel needed to execute fabrication activities.
- Ensure coordination of all disciplines involved in works up to pre-commissioning I mechanical completion.
- Manage and warehouse project material
- Participate in defining production and maintenance plan.
- Check production work progress, identifying any critical aspects and, where construction activities are subcontracted, requesting necessary actions from subcontractor.
- Participate and lead in fabrication project planning and scheduling, liaising with the various functions involved in the execution of project.
- Assist Commissioning Team during commissioning and start up phases.
- Work jointly with HSE team in the preparation of project HSE Plan for construction and fabrication.
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Engineering is required. A Master’s degree is an added advantage but not a pre requisite.
- At least 15 years of relevant experience in Offshore fabrication activities of which 5 years must have been at management level.
- Excellent knowledge of Fabrication and Commissioning principles
- Excellent QHSE leadership skills.
- Excellent interpersonal relationship with customer focus.
- Pre & post tender contract management skills
- Cost management skills.
- Good knowledge of Engineering and Procurement systems/ methodologies
How to Apply Click here to apply online
Job Title 3: Project Quality Manager
Main Responsibility
- Definition and implementation of the PQMS, identification, preparation and distribution of Project Quality Plans and procedures in accordance with the Company Quality Management System (QMS).
- Plan and ensure Project Quality Control (QC) activities implementation
- Ensure Company’s QMS integrity is maintained in project execution.
- Ensure implementation of Project QMS is checked and monitored through planning of quality audits.
- Ensure implementation of planned quality audits, taking in account all project processes.
- Lead in external audit issues for vendors and subcontractors QMS
- Support Project Manager on issues of quality and interface with client and relevant authorities’ responsible for quality processes.
- Ensure quality requirements are incorporated in contractual documents with vendors and subcontractors.
- Analyze project quality data and lead Project Quality Management Reviews.
- Lead continuous process improvement to prevent and eliminate potential non-conformit ies and their causes
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Engineering is required
- At least 15 years of relevant experience in Project Quality Management with 5 years spent as a Project Quality Manager.
- Good knowledge Process analysis, redesign methods and procedure development
- Knowledge of Project Quality audit activities
- Knowledge of Quality Management System Knowledge fundamentals and ISO 9001
- Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS,etc.)
- Good knowledge of project management tools & methodologies
- Client and contracts management skills
- Knowledge of budgeting and controls
How to Apply: Click here to apply online
Job Title 4: Welding Supervisor
Main Responsibility
- Supervise execution of welding activities, checking that machineries and tools are properly used and maintained.
- Prepare and coordinate the detailed programs for the assigned welding activities
- Set-up the proper tools for the management of punch lists, producing adequate reports to monitor the status of the punch list points (open, closed, closure forecast dates)
- Coordinate assigned team, managing interfaces with construction, engineering and commissioning team in closing out punch lists.
- Organize work area for welding activities for improve HSE performance and overall efficiency.
- Provide quantitative data for producing weekly progress reports.
- Coordinate interfaces with prefabrication and erection activities
Job Requirements and Minimum Required Experience
- A Higher Diploma/Degree or its equivalent in Engineering is required.
- At least 10 years of relevant experience in welding and Fabrication
- Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS, etc.)
- Knowledge of the welding processes for offshore/fabrication yard activities (GMAW, SAW, FCAW, PAW, SMAW)
- Knowledge of different international codes/standards to develop and review Preliminary Welding Procedure Specification (PWPS) and Welding Procedure Specification (WPS).
- Knowledge of mechanical and metallurgical testing to be performed during Procedure Qualification Record (PQR) execution and review
- Knowledge of main ND methods and equipment.
How to Apply: Click here to apply online
Job Title 5: Cost Control Engineer
Main Responsibility
- Implementation of the cost control system, elaborating consolidated cost breakdown structure.
- Issues project cost control procedure, cost coding manual and risk management plan.
- Structuring commercial budget according to intercompany scheme, contract and work schedule.
- Coordinate risk management activities and lead in brainstorming and qualitative I quantitative assessment of identified risks and opportunities
- Ensure cost control system effectiveness and cost status is assessed and reported.
- Monitor progress of activities and earned value.
- Provide support during contract changes/claims process, providing cost impact analysis, and keeping cost/revenues forecast updated
- Analyse costs and activities to-date, review estimate to complete, isolating any deviation from baselines; providing advisory and supports Project manager.
- Maintain risk management process, organizing periodic meetings and verifying risk owners.
- Supports Project Control Manager in preparing Project close out report and cost feed-back data to Project Control and Commercial Departments.
Job Requirements and Minimum Required Experience
- A Higher Diploma / Degree or its equivalent in Science /Engineering is required.
- At least 8 years of relevant experience in Project Control and Cost management
- Knowledge of international and national accounting standards and principles
- Knowledge of Contract Management and Commercial Processes (contract evaluation, negotiation and proposal)
- Knowledge of WBS CBS implementation process.
- Knowledge of cost control, planning and document control tools, structure and management Knowledge of SAP
How to Apply: Click here to apply online
Job Title 6: Welding Engineer
Main Responsibilities
- Prepare and issue preliminary welding documents for project
- Review client’s specifications and scopes of work, examine pipe metallurgy and prepare detailed welding procedures
- Coordinate and schedule personnel and systems for qualification of welding procedures and welders.
- Ensure welding traceability information are recorded, maintained and made available in the required format for welding activities.
- Prepare and issue welding documents (Welding Books, WPSs, WPQR, PTW report, Procedures, etc.)
- Monitor Welding Quality through the analysis of the trends of project defect rates and Welders defect rates; proposing corrective and improvement processes.
- Supports welding coordinator and/or project teams on all welding matters
- Evaluate and estimate type and quantity of welding consumables.
- Maintain updated departmental project welding files and database
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Mechanical / Metallurgy / Chemical Engineering is required.
- At least 7 years of relevant experience in welding engineering and quality management.
- Knowledge of the principles of corrosion and corrosion control methodologies
- Knowledge of main applicable Industry materials selection and corrosion control international standards and codes (such as NACE, API, ISO, NORSOK, DNVGL, etc.)
- Knowledge of Standards, Regulation and Codes for Engineering Criticality Assessment (ECA) and Fitness for Service (FFS).
- Knowledge of the Fatigue Analysis principles and testing methods.
- Knowledge of mechanical properties of metals and standard testing
- Knowledge of the principles of metallurgy and materials science.
- Detailed knowledge of NDT Engineering (Specific knowledge of advanced technologies (PA-UT, TOFD, TFM/FMC, Digital RT, etc.)
- Knowledge and interpretation of international codes, client’s specification and acceptance criteria
How to Apply: Click here to apply online
Job Title 7: Assets Maintenance Engineer
Main Responsibilities
- Ensure equipment classification for project
- Ensure efficient maintenance planning and identify required resources for activities
- Ensure setup of maintenance system for new assets
- Prepare KPI with regard to maintenance activities.
- Supports asset planning and ensure maintenance cycles improvement
- Ensure training of maintenance operators and manage issues of assets audit.
Job Requirements and Minimum Required Experience
- A Higher Diploma / Degree or its equivalent in Engineering is required.
- At least 8 years of relevant experience in Assets management and maintenance
- Knowledge of tool and software for assets maintenance and management.
- Knowledge and application of preventive maintenance techniques.
- Knowledge of spare parts management, client supply chain workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
- Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
- Knowledge stock management
- Knowledge of Maritime Laws and regulations Management System (ISM, ISPS, MLC2006)
- Knowledge of adequate Personal Protective Equipment – purpose, use and maintenance
- Knowledge of permit to work system
How to Apply: Click here to apply online
Job Title 8: Production Planner
Main Responsibility
- Plan production activities according to project schedule and availability of drawings, materials and personnel.
- Set up and maintain cumulative project workload
- Manage project materials, production feed and production plan.
- Prepare and estimate feasible WorkPacks for production
- Set up and maintain fabrication databases (material utilization factors, productivity)
- Validate and analyse production feedback in respect to progress, productivity, spent hours and materials, ensuring traceability and final reconciliation
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Engineering is required.
- At least 8 years of relevant experience in fabrication production project planning.
- Good knowledge of warehouse management
- Knowledge of project technical documents
- Knowledge of fabrication Engineering.
- Good knowledge of fabrication and installation techniques
- Good knowledge of project management tools &risk management techniques
- Knowledge of SAP and other relevant production planning tools.
How to Apply: Click here to apply online
Job Title 9: Fab Yard Mechanical Completion Co-ordinator
Main Responsibilities
- Review contractual documentation for mechanical completion issue and identify project requirements & constraints on installation and mechanical compl.
- Lead in project planning & scheduling for mechanical completion and installation activities.
- Prepare and keep up-to-date mechanical completion execution plans
- Supervise I coordinate the preparation of the test pack (mechanical completion dossier)
- Supervise coordinate the preparation of the Mechanical Completion procedure, preparation of all checklists and relevant check sheets.
- Participate in preparing Project HSE Plan for mechanical completion activities
- Manage and categorize punch list in coordination with other functions engineering/construction/client/quality/hookup/ pre commissioning/ commissioning)
- Supervise coordinate, check and test completeness and quality of fabrication in accordance with design documentation and specifications.
- Define and review mechanical completion consumables and materials
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or its equivalent in Engineering is required.
- At least 15 years of relevant experience in Offshore fabrication and mechanical completion activities of which 5 years must have been at the level of coordination of Mechanical and Installation activities.
- Project HSE Management
- Project production plan
- Good knowledge of quality control activities
- Knowledge of fabrication Engineering and project management.
- Good knowledge of fabrication and installation techniques
- Good knowledge of project management tools & methodologies
How to Apply: Click here to apply online
Job Title 10: Maintenance and Inspection Manager – (2000001W)
Main Responsibilities
- Ensure proper planning, utilization and Assets availability.
- Plan and conducts physical inspections on Assets and inventories.
- Provide technical support on Asset management
- Ensure lifting equipment certification scheduling and renewal
- Control planning and fixed Asset utilization.
- Ensure management fixed fabrication equipment, lifting gears, and fixed infrastructures.
- Schedule and ensure Assets and Equipment overhauls/maintenance and co-ordinate their implementation
- Manage inspections and maintenance activities on machineries and equipment while respecting fabrication schedule
- Effective implementation of inspections and maintenance plan.
Job Requirements and Minimum Required Experience
- Degree or its equivalent in Engineering is required.
- At least 15 years of relevant experience in Assets Management and Maintenance
- Knowledge of tool and software for assets maintenance and management.
- Knowledge and application of preventive maintenance techniques.
- Knowledge of spare parts management, Client Supply Chain Workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
- Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
- Knowledge stock management
- Knowledge of Maritime Laws and regulations Management System (ISM, ISPS,MLC2006)
- Knowledge of adequate Personal Protective Equipment – purpose, use and maintenance
- Knowledge of permit to work system
- Knowledge of Quality Management System fundamentals and IS09001
How to Apply: Click here to apply online
Job Title 11: Pre-Fabrication Superintendent – (2000001J)
Main Responsibilities
- Manage execution and welding of structural prefabrication, piping prefabrication, piping supports pre-fabrication, appurtenances prefabrication and elementary assembly
- Coordinate workshop support activities (lifting and handling)
- Ensure welding activities and non-destructive controls are carried appropriately.
- Ensure consumables deployed for fabrication are in compliance with required quality procedures and standard.
- Ensure proper discipline workflow, interfacing with project organization and client.
- Interface with Asset unit for equipment maintenance and repairs.
- Provide information regarding work progress indicating any variation.deviations and suggesting corrective actions.
- Control production parameters in terms of efficiency and productivity.
Job Requirements and Minimum Required Experience
- A Bachelor’s degree or Higher Diploma in Engineering is required.
- At least 15 years of relevant experience in Offshore fabrication activities of which 5 years must have been at Supervisory level.
- Project production planning
- Good knowledge of welding engineering and techniques.
- Good knowledge of quality control activities.
- Fabrication engineering project management.
- Knowledge of steel materials
How to Apply: Click here to apply online
How to be updated regularly on Saipem Recruitment and other available jobs